Formwork technical article header image

The Lowest Bid on Our Jaipur Office Renovation Cost Me $2,600 in Hidden Fees

2026-11-03 · Nisha Kapoor

The Lowest Bid on Our Jaipur Office Renovation Cost Me $2,600 in Hidden Fees

In September 2024, I opened an email that made my stomach drop. Our Jaipur office renovation had been approved. All of it. Including the lobby refresh, the gym conversion, the break room upgrade, and the loading dock garage door replacement I'd been quietly hoping would get deferred to next fiscal year.

I'm an office administrator for a 300-person company. I manage all facilities procurement—roughly $250,000 annually across eight vendors—and I report to both operations and finance. Which means when a renovation goes over budget, I'm the one who has to explain it. Twice.

Six years in, I thought I'd seen every vendor trick. That renovation proved me wrong. It taught me a lesson I now apply to every order, whether it's Division 10 architectural products or the glass bottles in our break room.

Let me back up.

The project

The renovation touched everything. The lobby needed wall protection—corner guards, kick plates, that sort of thing—plus expansion joint covers at the elevator bank and new sunshades on the south-facing windows. The gym conversion required a frameless shower door. The break room needed a water station with branded glass bottles for a client event we were hosting in December. And the loading dock garage door was, in the facilities manager's words, "one good winter away from a lawsuit."

My first search was literally "construction specialties in Jaipur." I was looking for a vendor that understood Division 10 products—wall protection, louvers, grilles, sunshades. I'd used Construction Specialties (C/S) on two prior projects in the U.S., and their Acrovyn wall protection had survived a decade of office wear without a single tenant complaint. So I reached out to them, and also requested a quote from Preferred Construction Specialties Inc. for comparison. Nothing personal—just good practice.

Collecting quotes—and the first red flag

For the garage door, I did what anyone would do: I typed "how much is a garage door" into Google. The answers ranged from $800 to $12,000. Basically useless. So I started calling local installers and asking for written quotes.

The first came in at $4,200. The next two were $6,800 and $7,500. I remember staring at that $4,200 number and thinking, "Well. That's the one."

But something nagged at me.

The quote that looked too good

Two years earlier, I'd managed a similar garage door replacement at our Denver office. I assumed the number on the page was the number I'd pay. I didn't verify. Turned out the vendor had quoted labor only—no materials, no disposal, no permits. The final invoice was 60% higher than the quote. I ate $2,600 out of the department budget and had to explain it to finance. Not my finest moment.

I knew I should have asked for a full scope in writing before approving that Denver job. But I thought, "It's a garage door. How complicated can it be?" That was the one time it mattered.

So this time, before signing anything, I sent what I now call my two-question email:

"What's NOT included in this quote? And what could change the final invoice?"

The $4,200 vendor's reply took two days. When it came, it was a list: permit fees ($340), old door disposal ($450), electrical disconnect ($780), a 15% weekend-install premium, and—the kicker—a note that the $4,200 didn't include the door itself ("supplied by owner"). Real number: about $6,800. Same as everyone else.

I should add that the vendor wasn't being malicious. He just didn't volunteer anything I didn't specifically ask for.

The pattern

The garage door wasn't an outlier. The frameless shower door quote for the gym omitted sealing and frame anchoring—both required by our building code. The glass bottle supplier quoted $3.10 per bottle but didn't mention a $280 setup fee for the logo print. Oh, and the "free" delivery was free only to the loading dock, not to the break room on the third floor. That was another $90. Plus a lead-time surcharge if we ordered after November 1.

Basically, every quote had an asterisk. Some vendors were upfront about it. Most weren't.

What a transparent quote looks like

The Construction Specialties quote worked differently. I asked the same two questions. Their rep—who was super responsive, I'll give them that—sent back a single document itemized down to freighting and installation specs. Corner guards and kick plates were line items, not "billed separately, TBD." The warranty terms were on page two. The total was higher than the garage door guys' original number on paper, but nothing in it was going to change.

We went with them. They delivered on schedule. (Should mention: we'd built in a three-day buffer, which is the only reason "on time" actually meant something on the client event.)

What I do now

Everything I'd read about procurement said to get three quotes and take the lowest. In practice, after about 15 renovation projects with budgets between $40K and $400K, I've found the opposite: the lowest quote is usually the one with the most hidden add-ons. The quote that lists the most—even at a higher total—ends up cheaper.

So I ask two questions before I ask the price. And I've stopped assuming a vendor's silence on a cost means the cost doesn't exist.

That's the lesson. It took me—well, a $2,600 mistake and a near-miss two years later to actually internalize it.

My experience is based on about 15 office and light-commercial projects, and I've only worked with domestic vendors in the U.S. and India. If you're doing healthcare, industrial, or anything with stricter compliance requirements, your vetting has to be more formal than my two-question email. But the principle holds: the number on the quote is rarely the number on the invoice.

I still don't have a clean answer to "how much is a garage door." But I've got a better question: "What will the final invoice say?" That one I can actually work with.

Nisha Kapoor

Nisha Kapoor

Nisha Kapoor is a construction-systems analyst covering formwork, scaffolding, shoring, prefabricated buildings, modular rooms, panelized assemblies, geotextiles, geogrids, and drainage composites. She uses ASTM D4595 and ASTM D6637 for their respective geotextile and geogrid tensile evaluations while tracking platform load, form deflection, prop spacing, module tolerance, lifting points, seam strength, aperture stability, and installation damage. Her technical guides help contractors, engineers, and developers coordinate temporary works, factory tolerances, site logistics, ground reinforcement, inspection hold points, and documented acceptance criteria.